• Latex printing technologies – these bring environmental, health, and safety benefits
• Environmentally responsible printing – innovative new water-based latex inks don’t produce ozone emissions during printing and are free from hazardous air pollutants. These inks are also non-flammable and non-combustible
• Outstanding quality – we guarantee the highest resolution images, sharp text printing and rich six-colour print outputs in widths up to 2.64 meters
• Fastest turnaround – our presses print at speeds of up to 70mph for outdoor prints and up to 35mph  prints at 1440 dpi resolution.
• Odorless printing – our latex inks omit extremely low levels of volatile organic compounds and require no ventilation. Or latex inks are completely cured inside the printer and form a durable film on the print medium, with prints emerging from the press ready to use
• Versatility – we can print indoor and outdoor Stickers on a variety of materials, from low-cost, uncoated, low-solvent compatible media to self-adhesive vinyl, banner, film, paper, fabric, mesh and more.

• Vinyl Self adhesive.
• Eco-friendly.
• Weatherproof and tear-resistant.
• Digitally printed at 1440dpi Full color.
• 510gsm after laminated.
• White Bubble Free Finish
•  indoors / outdoors, Trade show, events, conferences, presentations. easy to apply on Flat Surface .
• Life Span-Indoor 10 years+ / Outdoor 3 years+ with proper Placement and care
• Common Sizes- 3×3, 4×4, 5×5 easy measure to cut.

How to Apply Vinyl Graphics Using the Wet Method

This procedure is almost exactly like both the freehand and hinged methods. The only difference is the application of soapy water to the vinyl before application. By wetting down the vinyl first, you are able to reposition your graphics during application. REMEMBER, you cannot get the graphics too wet! The key to this method is keeping both your vinyls and your application surface wet.

Please take your time….

• Step 1- First peel your decal away from the wax paper backing. If your design has several separate pieces, it will come with adhesive masking holding the pieces or letters together.
• Step 2 – Next, you will need to apply either a mixture of soap and water or glass plus to the sticky side of your graphics.
• Step 3 – Make sure that the entire surface of the decal is covered with the soapy mixture. Use your fingers to spread the water or glass plus onto the adhesive side of the decal.
• Step 4 – After wetting down the adhesive side of the decal, we recommend that you also spray the desired surface with glass plus.
• Step 5 – You will then place your wet decal onto your desired surface.
• Step 6 – Use a credit card or squeegee to smooth the decal onto the surface. This will push out any left over glass plus and air bubbles. It is best to work in one continuous direction, ie. top to bottom.
• Step 7 – Do not worry if your decal seems a little slippery. Once the glass plus has dried, your decal will be stuck to the surface.